top of page

Ammonium bicarbonate, USP for precise application of ammonium in recirculating aquatic ecosystems. Provides nitrogen in a form that is more readily accessible to primary producers, inckuding zooxanthellae, than is the nitrogen derived from nitrite and nitrate. Chloride-free. USP-grade, ≥99% purity. Material origin: Europe.

 

Application of this material requires that user understands the role of ammonium in established aquatic ecosystems and will apply it per the requirements and limitations in the individual system of interest.

 

General Dosing Reference: Per 0.01 mg/L ammonium desired, add 0.00168 g NH4HCO3 per 10 gallons net system volume.

 

For a pre-mixed solution, please purchase Ammon8.

 

WARNING: Read instructions in entirety prior to use. Not for human consumption. Keep out of reach of children and unauthorized persons. Ammonium bicarbonate and its solutions are eye and membrane irritants.  Avoid contact with skin, eyes, and clothing.  Avoid inhalation of dust.  Do not handle these substances without proper personal protective equipment. These substances must be stored securely and in accordance with applicable state and local regulations. Keep container tightly-sealed, as this material is hygroscopic and will absorb atmospheric moisture. Your system's water chemistry and the safety of system inhabitants are your responsibility. Address any questions by contacting Captiv8 Aquaculture, directly, prior to application. Do not: Permit contamination of this container with moisture or foreign material; dispense unmixed product into established aquatic ecosystems; mix with raw tap water or system water; mix with solutions containing Mg, Ca, or Sr, as precipitation will occur; apply in close proximity to sessile invertebrates or developing finfish embryos. 

 

Storage: Not for human consumption. Keep out of reach of children and unauthorized persons. Avoid contact with skin, eyes, and respiratory tract. Purchaser/User assumes all risks and responsibilities associated with proper storage, handling, and application of this product. Notice: It is not possible to eliminate all risks associated with the use of this product. Ineffectiveness, injury to livestock, or other unintended consequences may result due to factors outside the control of Captiv8 Aquaculture or the seller. Buyer or user shall assume all such risks. Disclaimer: Captiv8 Aquaculture warrants that this product conforms to the description, and is reasonably fit for the purposes described, on its label. In no event shall Captiv8 Aquaculture or the seller be held liable for any incidental, consequential, or special damages, loss, or injury, including, without limiting, lost profits, resulting from the use or handling of this product. The exclusive remedy of the buyer or user for all claims shall be the return of the purchase price of this product. Express and implied warranties are disclaimed. Captiv8 Aquaculture does not authorize any agent or representative to make any other warranty, guarantee, or representation concerning this product. Buyer is neither licensed nor permitted to re-package this product, in part or in whole, for the purpose of resale.

 

Metered Application (RECOMMENDED): Per 0.01 mg/L ammonium desired per 10 gallons net system volume, mix 0.00168 g Isol8 NH4HCO3 into the desired volume of purified water and dose this continuously while primary producers are under adequate illumination to facilitate photosynthesis; DO NOT add the entirety of the solution to an established system in a shorter time frame.  Scale the mass of material used to achieve the desired [NH4+].  This ratio of material to net system volume is provided to users as a reference, only, for the purposes of calculation of the mass required to bring about the target increase in [NH4+].  STRONGLY RECOMMENDED IS TO RAISE AMMONIUM CONCENTRATION IN ESTABLISHED SYSTEMS AT A RATE NOT EXCEEDING 0.01 mg/L PER 24 HOURS.  Users may find that continuous dosing of the mixed solution does not yield a detectable [NH4+] for several days; despite this, it’s recommended to continue at the initial dosage for a period of at least 30 days prior to increasing the dosage (if necessary or desired).  If dosing results in signs of irritation within the cohort, then discontinue dosing immediately and either filter the system with Extric8 Z; apply Elimin8 DIN, Inocul8, or Remedi8; or permit [NH4+] to naturally fall to undetectable level prior to resuming dosing with a dosing rate of 50% the initial rate.

 

Ingredient Statement: Ammonium bicarbonate, USP.

Ammonium bicarbonate, USP 5000 g

$115.33Price
  • Purchase of this item requires that purchaser agree to Terms and Conditions, and to Return and Refund Policy. This step is completed at checkout.
bottom of page